Output

How many standard options are you usually presented with that line up with *your* connector of choice? Typically only two or three... At Electrol, we offer eight on-the-shelf output configurations to meet the needs of a wider, more sophisticated audience. Whether you're adding on or building anew, your plug specification won't be overlooked! Sectional input/output panels allow for a vast selection to choose from, increasing the overall configuration to 32 combinations.

Click on any of the below pictures to enlarge.

SX-1(-S, -V): Single six or eight circuit multipin connector. Please specify Socapex (-S), Veam (-V), or other when ordering.

Configuration: D625dx, Anaconda

The fastest and safest way to distribute 6/8 dimmer channels to lamp sources known in our galaxy.

SX-2(-S, -V): Dual six or eight circuit multipin connectors. Please specify Socapex (-S), Veam (-V), or other when ordering.

Configuration: D625dx, D125dx

Output panel can be configured as parallel (dual) outputs per channel for 6 x 2.5K or as single output per channel for 12 x 1.5K. Ideal for applications where "mirroring" of lighting instruments is needed for a balanced look.

top

SX-4(-S, -V): Four six or eight circuit multipin connectors. Please specify Socapex (-S), Veam (-V), or other when ordering.

Configuration: D625dx, D125dx

Extremely efficient manner with which to distribute dimmer channels; especially with today�s lower wattage/higher output lamp technologies. Configured as four outputs per dimmer channel with the D625/D625dx, or parallel (dual) outputs per channel with the D125dx. Positively the penultimate for any outfit employing six or eight way lamp bars!

top


PBSLP-6/12(-S, -V): Dual multipin output with hot-patching field. Please specify Socapex (-S), or Veam (-V), or other when ordering.
Configuration: D625dx, D125dx

Absolutely the fastest and easiest way to assign dimmer outputs to any respective instrument. Hot-patch is configured as 2 x 6 (D625, D625dx), or 1 x 12 (D125dx). If you are employing 8-circuit multi cable, specify the PBSLP-8/16(-S, -V).
top


30APL6X6, 30APL12X3: 30 Amp Powerlock output panels, arranged six groups of six, or twelve groups of three.
Configuration: D625dx, D125dx

The ultimate when it comes to hot-patching dimmer outputs! When employed with the load panel of your choice, a single dimmer channel can feed multiple connector types. Quintessential to any outfit where equipment may be combined or otherwise augmented from various sources quickly.
top


PBG-4/-6/-12: Parallel Blade Ground output panel, your standard "Edison" outlets.
Configuration: D625dx, D125dx, Anaconda (PBG-4 and -6 only)

What can we say? Who doesn�t have Edison cable runs? Rental departments will benefit the most here; client�s come with a limited budget for lighting all the time. You can save them the money of having to rent cable as well as dimmers. Save yourself the time of having to re-coil all the cable when it returns.
top


SP--3/-4/-6/-12: Stagepin (2P&G) output panel. Available as 3 X 50 Amp, 4/6/12 X 20 Amp
Configuration: D360dx (SP-3), D625dx (SP-12), D125dx (SP-12), Anaconda (SP-4A, SP-6A)

The mainstay 2P&G connector in all it�s flavors and variety. Available for loads of 20 and 50 amps; you probably won�t find a more durable or versatile means of interconnecting power around.
top


TBRA-12/-24: Terminal Strip output panel (Hot and Neutral per circuit) for installation loads where all ground wires are bussed.
Configuration: D625dx, D125dx

TBRA-12

TBRA-24
Easy installation for any electrician with the rear access terminal strip; all hots and neutrals are available for wiring with a standard #10-12 fork crimp. Economical and user-friendly equals faster installation time. The result? Your ability to better concentrate on the customer and their needs.
top


TBLGO: Terminal Strip output panel (Hot, Neutral, and Ground per circuit) for installation loads where a dedicated ground wire per circuit must be used.
Configuration: D125dx

Extremely fast installation is facilitated by the lack of crimps or connectors of any kind. Spring loaded compression terminals accept up to #12 AWG wire and all your neutrals and grounds are pre-bussed! Absolutely the quickest and safest installation wiring scheme ever.
top


DMX Mains Input : Typical DMX/Analogue/Architectural I/O panel. Standard for the dx series dimmers.
Configuration: DX Series dimmers

Industry standard Neutrik gold plated 5-pin XLR's employed for DMX/Architectural data input and passthrough. Analogue input provided with D-Subminiature gold plated 15 pin locking connector for added security and stability.
top


PL5 Mains Input: 75A Powerlock Quick-Connect, 5 pole for three phase PL5120 Mains Input: 120A Powerlock Quick-Connect, 5 pole for three phase
Configuration: DX Series Dimmers

PL5	PL5120
Disconnectable 75/120A Powerlock quick connects; can be arranged for three, four, or five wire systems. Allows for complete interchangeabliity between systems; or as a time efficient means of quickly connecting power to a stand alone dimmer pack. Low impact, low maintenance connections provide a reliable, long life distribution solution for all your lighting projects.
top


SR/Mains Lugs Input Panel: Strain relief, compression lug mains connections inside dimmer (4 or 5 pole).
Configuration: DX Series dimmers

1" Romex strain relief to accommodate up to 6/5 SO type cable for applications where permanent tails are desirable for bare wire, cam-type, or user definable connector input power to the unit.
top