Electrol


LDI 2006 Widget of the Year The DMX 512 Plug-in Isolator Splitter/Repeater



The New Lex Electrol 512 DMX Plug-in Isolator Splitter/Repeater (ISR 1.2) is a compact plug-in unit that provides one in, two out isolation and buffering of DMX signals. The Plug-in Splitter is not only capable of rebuilding very weak signals, it can isolate ground loops, reduce static electricity problems and provide high drive for long cable runs.



Lex Products Corp Acquires Electrol
			Click here to go to Lex Products' web site
Effective June 1, 2006, Lex Products acquired Electrol Engineering, Corp. Bill Fehrmann, the founder of Electrol Engineering will continue to run Electrol as a division of Lex Products from its current Forest Hill, MD location.




Electrol was established in 1982 with the idea of providing a quality product at a reasonable price for the theatrical lighting industry. Whether the application be in theatre, television, touring applications, themed environments, or architectural control, Electrol Engineering was formed to meet and exceed the strenuous demands of the international entertainment field. Since that time, we have continuously evolved to the company we are today. We innovated the trimless dimmer market, which is now a standard in high-performance dimming.			Always looking to the future, we introduced the dx series of digital dimmers; worldwide voltage acceptance, immunity to miswiring, and an extensive litany of memory functions have made the dx line the forerunner in the touring and permanent installation markets. We are constantly researching new technologies and strategies to be able to incorporate new ideas and methods for the consumer. We have always been critically aware that the customer's needs are the sole reason we are in business. Input from our customers and end users from around the world are utilized to meet the specifications and desires for the highest quality, most reliable products available.

Click on product image to go to that page

dx Digital Dimming	Portable Digital Dimming	LFD Single Ch Dimming

Electrol presents digital dimming with a level of sophistication that ideally suits every conceivable application whether architectural, touring, rental, theme-park, television or film, the dx series dimmers meet the challenge.	Original to the lighting industry, Electrol again creates the standard by which all others are measured. The Anaconda is a fully microprocessor controlled dimmer with a host of innovative features not available elsewhere in the lighting industry.	Self contained local/remote controlled 1800 watt dimmer used for specials, practicals, or any instance where precise manual control is required. Entrance cues taken on a visual are many times a must as only one example. Don�t let your talent get caught in the dark again!



Dimmer Output Panels	Dimming Racks	Power/Load Distribution

How many standard options are you usually presented with that line up with your connector of choice? Typically only two or three... At Electrol, we offer eight on-the-shelf output configurations to meet the needs of a wider, more sophisticated audience. Sectional input/output panels allow for a vast selection to choose from, increasing the overall configuration to 32 combinations.	Permanent installation or touring racks are offered for the dx Series dimmers and may easily be installed with the appropriate load or power distribution. Available in endless configurations, all rack systems are individually tailored for your unique requirements. The competitions' high priced custom design is our everyday product.	Getting the power needed to run your show from your mains source to points various and sundry shouldn't be on the top of your worry list. The configuration possibilities using Electrol power distribution panels make short work of even the most complex setup; whether it be for a touring or permanent installation application.



Y3K Architectural Control	DMX Isolator / Splitter	Soft12 DMX Decoder

Y3K Architectural Lighting Interface Control has created a new level for the seamless integration of House/Stage dimming control. No longer is there need of remote interface panels, unique preprogrammed software chips, or separate dimmer cabinets for houselight channels.	The ISO1.X is a portable one-in, two-output DMX isolator/splitter/repeater device providing complete electrical isolation between consoles and any DMX controllable object. The unit comes very attractively priced, and the outputs can be configured to any number from two to infinity.	The Soft 12 provides twelve individual 0-10VDC outputs which are fully soft-patchable to any of 512 control DMX channels. The displayed dimmer may be re-assigned any value up to 87, providing instant visual access to 99 dimmers.



DMX Relay/Dimmer

Originally designed to activate a blender backstage from the lighting console, the Margarita Mixer is a compact DMX controlled non-dim/relay device providing a full 1800 watts of switched power for fans, foggers, fluorescents, food processors, or any other device requiring AC power that needs to be controlled remotely.		Pages best viewed in IE or later revisions of Netscape.